Exhaust Pipe Bending Tube Bender Machine (BY-50NC)

Model NO.: 50 NC
Customized: Customized/Non-Customized
Advantage: Use Widely
Condition: New
Applicable Pipe Shape: Round, Rectangle, Square, Oval, Solid Bar, Profile
Applicable Material: S. S., M. S., Copper, Aluminium, Alloy, Galvanized
Bending Theory: Cold Bending
Technical: Draw Bending/Drawing Bending+Booster/Rolling
Color: Standard/Customized
Cooling System: Water Cooling/Fan Cooling
Lubrication: Automatic Linear Guide/Mechnical Lubircate
Software Optional Function: Anticipated Mandrel Extraction
Machine Optional Function: Safety Mat
Optional Function: Manual Feeding or Manual Rotating
Trademark: BEYOUNG
Transport Package: Wooden Case
Specification: 3000x800x1100mm
Origin: China
HS Code: 8462219000
Model NO.: 50 NC
Customized: Customized/Non-Customized
Advantage: Use Widely
Condition: New
Applicable Pipe Shape: Round, Rectangle, Square, Oval, Solid Bar, Profile
Applicable Material: S. S., M. S., Copper, Aluminium, Alloy, Galvanized
Bending Theory: Cold Bending
Technical: Draw Bending/Drawing Bending+Booster/Rolling
Color: Standard/Customized
Cooling System: Water Cooling/Fan Cooling
Lubrication: Automatic Linear Guide/Mechnical Lubircate
Software Optional Function: Anticipated Mandrel Extraction
Machine Optional Function: Safety Mat
Optional Function: Manual Feeding or Manual Rotating
Trademark: BEYOUNG
Transport Package: Wooden Case
Specification: 3000x800x1100mm
Origin: China
HS Code: 8462219000
Brief Introduction on Pipe Bending Machine

Semi-automatic tube bending machine has an NC control unit to allow the operator to program the bend degree (C axis)-the standard memory can store up to 16 programs each with 16 sequential bends.This allows the operator to select from the memory to bend sequence they require and load the tube and start bending. The rotating and feeding (B&Y axis) are controlled manually. Other movements as die working,mandrel working are controlled by hydraulic. Pipe Bending Machine combines easy-to-use operation with high bending accuracy and cost effectiveness. It is the practical semi-automatic solution for small to medium productions.

Features on Pipe Bending Machine
  1. Interactive Touch Screen offers easy access to auto and manual operating
  2. modes.
  3. Standard clockwise bending direction.
  4. Fully hydraulic clamping on clamp die and pressure die.
  5. Level-way hydraulic clamping.
  6. Direct acting hydraulic pressure die with adjustable speed valve.
  7. Maximum 16 sets of program storage,Maximum 16 bends for each program.
  8. Programmable material spring back settings for each bend angle.
  9. Bending Axis-Driven by Cylinder,Feeding Axis-Manual,Rotating Axis-Manual.
  10. Obtain quality repeatable bends in steel, stainless, aluminum, titanium and  
  11. brass.
  12. Foot Pedal Cycle start.
  13. With Water Cooling System.
  14. One set of Tooling for Draw Bending.
  15. Wiper die Bracket.
  16. 1 Mandrel Rod.
  17. Operation and Maintenance Manual.
  18. Tool Box with Adjusted Tools.
  19. Electric: As required (3 phase 220V or 380V or 415V...)
Optional
  1. Anticipate Mandrel Extraction
  2. Automatic mandrel/machine lubrication
  3. Anti-clockwise bending direction
  4. Machine effective length over mandrel  
  5. Safety Mat
Technical Specification
 
Item Name Unit Technical
01 Max. Bending Capacity:Mild Steel mm ¢50x2
02                Stainless Steel mm ¢42x2
03 Min Bending Radius(Draw Bending) mm >=1.5D
04 Max. Bending Radius(For Machine) mm 250
05 Mandrel Length mm 2300(Can be Customized)
06 Max Bending Angle ° 190
07 Bending Axis Speed Deg/sec 120
Accuracy mm ±0.1
Power KW 5.5 Controlled by Hydraulic
08 Machine Size mm 3000x800x1100

Machine Photos Reference

Exhaust Pipe Bending Tube Bender Machine (BY-50NC)

Exhaust Pipe Bending Tube Bender Machine (BY-50NC)

Exhaust Pipe Bending Tube Bender Machine (BY-50NC)

Exhaust Pipe Bending Tube Bender Machine (BY-50NC)

FAQ:


1. Q: Are you a manufacturer or trading company?
     A: Yes, we are a manufacturer.We are focusing on metal pipe/tube processing machines production.

2. Q:Where is the nearest airport to your company?
     A: Wuxi Airport or Shanghai Airport.

3. Q: How to choose the pipe/tube bending machines?
     A: You have to inform us following details:
         - Pipe Outdiameter Range
         - Wall thickness range
         - Bending Radius Value
         - The pipe material
         - Bends Number on one pipe
         - The drawings if possible

4. Q: What certificate do you have?
     A: We have both ISO and CE certificate.

5. Q:How about your service?
    A: Before Sales Serive: 
         1. We will help our customer confirm the right model according to the offered pipe inforamtion.
         2. Welcome to visit our factory to see our machine and our workshop before you place an order.
       
         After Sales Service:
         1. We provide manual book,detailed machine installation,commissioning video for help you correctly   
         operate machine.
         2. We provide free installation,commissioning and training at our factory.If you need engineer go to
             your factory for machine installation, air tickets,food,hotel,local transportation shoule be at your 
             account.
         3. Any problems on machine,we will reply you by email/tel or other online contact within 24 hours.


Packing&Delivery

Exhaust Pipe Bending Tube Bender Machine (BY-50NC)

Company Introduction:

Zhangjiagang BEYONG Machinery Manufacturing Co.,Ltd has been serving on tube processing machinery industries for over 15 years. We are committed to providing our customers with quality products, solutions and services provided on schedule, at competitive prices. Standard of mechanical parts including structure,characters etc... are similar with European's.For out-sourcing parts including Electric,Hydraulic,Mechanical etc...are from well-known companies.

Our Machines with full line of metal pipe processing machines including tube bending machine, circular saw machine, end forming machine, chamfering machine, saw blade sharpener,riveting machine...etc. Further more,we can customized machines with advanced technology,such as multi-function machine with draw bending+push bending+punching,straightening+bending+cutting and so on.   

Our machines export to Italy,Germany,Australia,Russia,New Zealand,Canada, Poland,Mexico, Brazil,Chile,Argentina,Saudi Arabia,South Africa, Egypt,England etc.


Exhaust Pipe Bending Tube Bender Machine (BY-50NC) Brief Introduction on Pipe Bending Machine

Semi-automatic tube bending machine has an NC control unit to allow the operator to program the bend degree (C axis)-the standard memory can store up to 16 programs each with 16 sequential bends.This allows the operator to select from the memory to bend sequence they require and load the tube and start bending. The rotating and feeding (B&Y axis) are controlled manually. Other movements as die working,mandrel working are controlled by hydraulic. Pipe Bending Machine combines easy-to-use operation with high bending accuracy and cost effectiveness. It is the practical semi-automatic solution for small to medium productions.

Features on Pipe Bending Machine
  1. Interactive Touch Screen offers easy access to auto and manual operating
  2. modes.
  3. Standard clockwise bending direction.
  4. Fully hydraulic clamping on clamp die and pressure die.
  5. Level-way hydraulic clamping.
  6. Direct acting hydraulic pressure die with adjustable speed valve.
  7. Maximum 16 sets of program storage,Maximum 16 bends for each program.
  8. Programmable material spring back settings for each bend angle.
  9. Bending Axis-Driven by Cylinder,Feeding Axis-Manual,Rotating Axis-Manual.
  10. Obtain quality repeatable bends in steel, stainless, aluminum, titanium and  
  11. brass.
  12. Foot Pedal Cycle start.
  13. With Water Cooling System.
  14. One set of Tooling for Draw Bending.
  15. Wiper die Bracket.
  16. 1 Mandrel Rod.
  17. Operation and Maintenance Manual.
  18. Tool Box with Adjusted Tools.
  19. Electric: As required (3 phase 220V or 380V or 415V...)
Optional
  1. Anticipate Mandrel Extraction
  2. Automatic mandrel/machine lubrication
  3. Anti-clockwise bending direction
  4. Machine effective length over mandrel  
  5. Safety Mat
Technical Specification
 
Item Name Unit Technical
01 Max. Bending Capacity:Mild Steel mm ¢50x2
02                Stainless Steel mm ¢42x2
03 Min Bending Radius(Draw Bending) mm >=1.5D
04 Max. Bending Radius(For Machine) mm 250
05 Mandrel Length mm 2300(Can be Customized)
06 Max Bending Angle ° 190
07 Bending Axis Speed Deg/sec 120
Accuracy mm ±0.1
Power KW 5.5 Controlled by Hydraulic
08 Machine Size mm 3000x800x1100

Machine Photos Reference

Exhaust Pipe Bending Tube Bender Machine (BY-50NC)

Exhaust Pipe Bending Tube Bender Machine (BY-50NC)

Exhaust Pipe Bending Tube Bender Machine (BY-50NC)

Exhaust Pipe Bending Tube Bender Machine (BY-50NC)

FAQ:


1. Q: Are you a manufacturer or trading company?
     A: Yes, we are a manufacturer.We are focusing on metal pipe/tube processing machines production.

2. Q:Where is the nearest airport to your company?
     A: Wuxi Airport or Shanghai Airport.

3. Q: How to choose the pipe/tube bending machines?
     A: You have to inform us following details:
         - Pipe Outdiameter Range
         - Wall thickness range
         - Bending Radius Value
         - The pipe material
         - Bends Number on one pipe
         - The drawings if possible

4. Q: What certificate do you have?
     A: We have both ISO and CE certificate.

5. Q:How about your service?
    A: Before Sales Serive: 
         1. We will help our customer confirm the right model according to the offered pipe inforamtion.
         2. Welcome to visit our factory to see our machine and our workshop before you place an order.
       
         After Sales Service:
         1. We provide manual book,detailed machine installation,commissioning video for help you correctly   
         operate machine.
         2. We provide free installation,commissioning and training at our factory.If you need engineer go to
             your factory for machine installation, air tickets,food,hotel,local transportation shoule be at your 
             account.
         3. Any problems on machine,we will reply you by email/tel or other online contact within 24 hours.


Packing&Delivery

Exhaust Pipe Bending Tube Bender Machine (BY-50NC)

Company Introduction:

Zhangjiagang BEYONG Machinery Manufacturing Co.,Ltd has been serving on tube processing machinery industries for over 15 years. We are committed to providing our customers with quality products, solutions and services provided on schedule, at competitive prices. Standard of mechanical parts including structure,characters etc... are similar with European's.For out-sourcing parts including Electric,Hydraulic,Mechanical etc...are from well-known companies.

Our Machines with full line of metal pipe processing machines including tube bending machine, circular saw machine, end forming machine, chamfering machine, saw blade sharpener,riveting machine...etc. Further more,we can customized machines with advanced technology,such as multi-function machine with draw bending+push bending+punching,straightening+bending+cutting and so on.   

Our machines export to Italy,Germany,Australia,Russia,New Zealand,Canada, Poland,Mexico, Brazil,Chile,Argentina,Saudi Arabia,South Africa, Egypt,England etc.


Exhaust Pipe Bending Tube Bender Machine (BY-50NC)

Benefits of Aluminum Die Casting for Consumer Electronics Aluminum Die Casting Parts include:

          â€¢    Integrate high-efficiency heat sinks in product design.

          â€¢    Completely recoverable..

          â€¢    Metal frame that protects the LCD screen.

          â€¢    The die-cast housing is very durable and can be integrated with heat sinks in its design

          â€¢    offers maximum benefits in terms of weight, strength and complexity


As one of the leading die casting manufacturers with over 10 years of experience, Zheke Mould Company has been offering superior die casting parts for consumer electronics manufacturing and other indudustries. With our professional technicians and cutting-edge die casting process, every piece of our parts comes out with reliable quality and cost effectiveness.

Our die casting services for Consumer Electronics Aluminum Die Casting Parts include the use of aluminum alloys. A key advantage of using aluminum in the die casting process is its low cost - aluminum parts are much less expensive than parts produced by other manufacturing processes. From a functionality perspective, aluminum die cast parts typically weigh one-third less than steel parts, while still offering the strength and durability that is essential for any lighting fixture.


Consumer Electronics Aluminum Die Casting Parts

Consumer Electronics Aluminum Die Casting Parts,Customized Aluminum Die Casting Parts,Custom-Made Die Casting,Customized Die-Casting Parts

Zheke Mould Technology Co. Ltd. , https://www.zkdiecasting.com